250g PCL+1g Color Pigment Plastimake Instamorph Shape Shifter polymorph plastic

  • $23.54 GBP

250g PCL+1g Color Pigment Plastimake Instamorph Shape Shifter  polymorph plastic 

Polymorph is an non-toxic, lightweight polyester biodegradable thermoplastic, This hand moldable plastic has a melting temperature of about 136-140°F (58-62°C). It is great for making one-off prototypes, quick attachments and sub-assemblies, impressions to use as a temporary mold, and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts, anything you can imagine because of its particular characters.


1, Excellent Bio-compatibility

Polycaprolactone products is compatible in body. fully degrade into CO2 and H2O in 6-12 months in commercial compost

2, Excellent biodegradability

Fully degraded into CO2and H2O in 6-12 months in commercial compost.

3, Be compatible with other plastic resins

Compatible with PE, PP, ABS, AS, PC, PVAC, PVB, PVE, PA and natural rubber well.

4, Good dis-solubility

Aromatics-soluble, ketone-soluble, polar solvent-soluble

5, High crystallinity and low melting point

Good ductility (Tg: -60°C ) ; Melting point is 58°C -62°C.


1, Drug carrier, Organ and tissue culture frame

2, Biodegradable Suture

3, High strength film and filiform molding material.

4, Material in medical, industrial, plastic art and toy

5, Organic coloring agent , thermo-autotype ink, thermal fusion tackifier

6, temporary mold, and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts……..

How to use polymorph?

1,Simply heat the pellets in water to over 42°C (water from a hot tap typically).

1,Leave the pellets to melt in the water until they turn transparent.

3,Remove the pellets from the water and mould by hand (add color at this stage if required)

4,Allow the polymorph to cool until solid.

5,Re-heat if further molding is required.


There are colors for your selection:Red,Black,Green,Blue,Yellow.

1,Add some coloring master batch when heat polymorph materials.1 g coloring pigment is enough for 200g prototype material.Try different combinations and ratios to get different colors.

2.Knead, twist and fold it with your hands to mix in the colors.

Always be careful when handling warm polymorph materials.Soften polymorph materials by putting it back in hot water if required.Colors will get lighter as your prototype items cools.


We'd like to think that if you`re smart enough to realize the amazing possibilities of moldable plastic, we wouldn`t have to tell you this, but we`ll do it anyways…

•Burns suck. Be careful when heating water or using your stove or heat gun to heat up Polymorph. Heating Polymorph above 150 degrees F increases the likelihood of heat related injuries.

•Small pellets of Polymorph could be a choking hazard. Please supervise small children when using Polymorph.

•Polymorph can stick to different materials when it`s hot. Sometimes you want this, sometimes you don`t. It can stick to the following including but not limited to: metal, other plastic, vinyl, fabrics, acrylics (like fake fingernails or Plexiglas), and  Styrofoam .

•Because of the unique remoldable property of Polymorph, you should keep your finished pieces away from sources of extreme heat. We would hate to see you lose your amazing creation in a tragic space-heater accident.

•Although its non-toxic, Polymorph has not yet been certified "safe for internal use" or "food contact safe".

We Also Recommend